Surface-mounted LED ceiling light with motion sensor
The LED Ceiling Light for E27 bulbs with a motion sensor is the ideal system to save energy in spaces where we might get distracted and leave the light on or for those who prefer not to press the switch.
It has a radar system that automatically turns on the light fixture when it detects movement within its range. When the waiting time we have set on the regulator has elapsed and no movement is detected, the light turns off again.
According to our needs at any given time, we can adjust many parameters of the operation of the ceiling light. We can adjust the delay time for the light to turn off when it stops detecting motion, from 5 seconds to 30 minutes, and we can also regulate the ambient light sensor to define whether we want the lamp to illuminate below the defined threshold.
The E27 LED ceiling light with motion sensor features an IP44 rating that ensures its operation in humid areas, places where condensation from water vapor may occur, such as bathrooms.
The brightness offered by the ceiling light will depend on the E27 bulb (not included) that we install in it.
This ceiling light is especially practical in passage areas such as hallways, staircases, or entryways and in bathrooms, serving as general LED lighting, both in homes and in stores, hotels, etc.
Its installation is very simple
1. Disconnect the power to prevent accidents.
2. Screw the bracket into the ceiling or wall.
3. Use the included strips to make the electrical connections (make sure the power is turned off to avoid accidents).
4. Screw the LED ceiling light into the mounting bracket.
All the mounting accessories are included in the kit. You will only need a drill to make holes in the ceiling and a screwdriver to secure the LED downlight and make the connections.
It has a motion detection range of 0.5 to 3 meters per second and a detection area of 12 meters in distance by six meters in height. The sensor activates whenever it detects motion. It is characterized by its presence and luminosity detector.
- Rated Load
- 400W (inductive), 800W (resistive)
- Transmitting power
- <0.5mW
- Detection zone (DXH)
- 12m x 6m
- Frequency band
- ISM (5.8GHz ± 75MHz)
- Detection sensitivity
- 10%/20%/50%/75%/100%
- Wait time
- 5s/30s/90s/3min/20min/30min
- Ambient light sensor
- 2lux/10lux/25lux/50lux/OFF
- Installation height
- 6m Max.
- Motion detection
- 0.5-3m/s
- Detection Angle
- 150˚ Wall - 360˚ Ceiling
- Operating temperature
- -20°F~+140°F
Detection area:
The detection area can be reduced by selecting the combination on the DIP switches to precisely fit each application.
Wait time:
Duration of time that the lamp remains at 100% illumination after the sensor no longer detects motion.
Ambient light sensor
The sensor can be configured to allow the lamp to illuminate below a defined ambient light threshold. When set to the Off mode, the daylight sensor will turn on the lamp when motion is detected, regardless of the ambient light level.
50 lux, 30 lux: twilight operation, 10 lux, 2 lux: low light operation.
