Skip to Content
  1. All Products
  2. All Products
  3. Infrared PIR Motion Sensor - 360° - Surface and Recessed
Prestashop ES

Infrared PIR Motion Sensor - 360° - Surface and Recessed

1 review(s)
https://new.barcelonaled.com/web/image/product.template/1379/image_1920?unique=c0f81a1

The microwave motion sensor allows you to save energy as it can turn the LED lights on and off automatically. This sensor is a 2-in-1, it can be mounted both on the surface and recessed. The motion sensor detects when someone enters its field, with a detection range of 6 meters and a detection angle of 360 degrees. One of the great features of the sensor is that it detects light both at night and during the day, allowing for more effective use of LED lighting energy. IP20 protection rating, for indoor use only.

Ref. SP41B

8.49 € 8.49 EUR 8.49 € Tax Included

7.02 € Tax Included

Not Available For Sale

This combination does not exist.

Contact Us

Share

Download product data sheet
Product Review's
1
Comprador verificado
muy buena calidad muy sensible perfecto

Detection angle (º) 360
Certs CE | ROHS
Dimensions (mm) LxWxH Ø93 x 32
Cutting dimensions (mm) ⌀73
Frequency (Hz) 50 - 60
Frequency of Use Intensive
Guarantee According to legal warranty: 3 years
IP IP20
Material Polycarbonate
Detection range (m) 6
Temperature range -20°F ~ +40°F
Sensor Yes
Nominal Voltage (V) 220 - 240 V AC
Outdoor Use No
Product Image

Microwave surface and recessed motion sensor

By using the microwave motion sensor, you save on your electricity bill, making it ideal for both residential and industrial use. This new sensor allows installation on surface and flush mount. It adopts good detection sensitivity with an integrated circuit. It combines automation, convenience, security, energy-saving functions, and practicality. It has a wide detection range of 6 meters. It operates by emitting radiation into the environment within the microwave spectrum. The sensor receives these waves and ensures that their parameters remain stable. If a person moves within the sensor's detection range, the waves reflected off the person will be received by the sensor with a frequency shift, triggering the activation signal. Designed for indoor use, with an IP20 protection rating.

Automatic Day and Night Detector

Automatically identifies day and night; its installation is very convenient and its use is very versatile. It has power indication and detection indication functions. It can adjust the ambient light, set to the "Sun" position (maximum) or working with an ambient light of less than 10 lux when set to the "Moon" position.

Comfort

Easy to install for an electrician or someone experienced. The delay time is adjustable according to the consumer's needs. The minimum time is 10 seconds ± 3 seconds. The maximum is 7 minutes ± 2 minutes. 


Motion sensor specifications

  • Power source: 220 -240V/AC
  • Detection range: 360°
  • Energy frequency: 50Hz
  • Operating temperature: -20°C~+40°C
  • Ambient light: <10-2000LUX (adjustable)
  • Working humidity: <93%RH
  • Delay time: min: 10sec±3sec
  • Installation height: 2.2-4m
  • Maximum: 7min±2
  • minimum power consumption: <0.9W (operating)
  • Rated load: 400W
  • Motion detection speed: 0.6 ~1.5m/s
  • Detection distance: 6m

 


Installation of the Sensor

➢ Disconnect the power.
➢ Turn the bottom bracket clockwise to remove it. Place the power cable through the hole in the center of the base.
➢ The bottom bracket is fixed in the selected position with the two screws.
➢ Connect the sensor's connection wires according to the wiring diagram.
➢ Turn counterclockwise to attach the bottom bracket.
➢ Ensure there are no objects in front of the sensor that obstruct or hinder detection.
➢ Avoid installing it near temperature disturbance zones, for example: air conditioning, heating, etc.