Skip to Content
  1. All Products
  2. All Products
  3. Remote control for IC RGB/RGBW SPI LED strip controller - 1 Zone - RF 2.4G
Prestashop ES

Remote control for IC RGB/RGBW SPI LED strip controller - 1 Zone - RF 2.4G

https://new.barcelonaled.com/web/image/product.template/4121/image_1920?unique=79e239b

RF remote control for digital LED strips (IC) RGB and RGBW.

Allows you to adjust the brightness of each color independently, control dynamic modes and scenes, etc.

It can control an area. It has a fast communication speed and a transmission distance of 30 m.

Works with CR3032 battery (not included).

Ref. SK-R9

14.99 € 14.99 EUR 14.99 € Tax Included

12.39 € Tax Included

Not Available For Sale

This combination does not exist.

Contact Us

Share

Download product data sheet
Product Review's
0

Certs CE | ROHS
Connectivity RF
Dimensions (mm) LxWxH 107 x 58.5 x 9
Control distance 30 minutes
Guarantee 5 years
Net Weight (kg) 0.058
Temperature range -30°F ~ +55°F
Battery type 3VDC (CR2032)
Key RGB | RGB-W
Product Image

The remote control operates via an RF receiver and uses the standard frequency of 2.4GHz, capable of transmitting the signal up to 30 meters, even through walls and ceilings.

Compatible with Skydance SPI receivers.

It features 32 preset dynamic modes, adjustable in speed and brightness. Additionally, it allows you to save scenes and control each color independently, adjusting their brightness, thus creating millions of possible colors.

The turning on and off is progressive, without flash, to avoid visual discomfort.

Includes a bracket that is installed on the wall using two screws, or it can also be adhered with adhesive.

Instructions for use:

1- Sync the controller with the remote: press the RF controller button and immediately press the "On/Off" button on the remote. The indicator light will start blinking indicating that the synchronization was successful.

2- Set the number of pixels for the LED strip: Press: * + sequence of 3 or 4 digits + * on the remote.

Example:

 *032* to set 32 pixels.

 *600* to set 600 pixels.

 *1024* to set 1024 pixels.

3- Configure the type of LED IC strip: Press: * + sequence of 2 digits + * on the remote, taking into account the equivalents in the table indicated in the instructions for use.

Example:

Press *12* to configure any of these types of LED strip ICs: TM1809, TM1804, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, SM16703P 

4- Set the order of the RGB colors: Press: * 1 digit + * on the remote according to the following equivalents:

*1*: RGB, *2*: RBG, *3*: GRB, *4*: GBR, *5*: BRG, *6*: BGR.

The brightness adjustment for each color independently is done with the keys (+) and (−)

To load the 32 dynamic modes, press and hold the "Mode +" button for 2 seconds.