Skip to Content
  1. All Products
  2. All Products
  3. 160º square PIR wall-mounted motion sensor
Prestashop ES

160º square PIR wall-mounted motion sensor

1 review(s)
https://new.barcelonaled.com/web/image/product.template/1576/image_1920?unique=3b012f9

Infrared sensor with a 160º detection angle, capable of detecting up to 8 meters, for devices or load accumulation up to 500W. For LED lights up to 200W. Easy automation switch for lighting with the sensor. Works in three-wire installations and can turn on and off all types of lights.

Mini Sensor ideal for replacing flush-mounted switches and automating lights in hallways, staircases, or bathrooms almost instantly, exclusively for indoor use with IP20 protection rating. It operates in installations with 3 wires. Thanks to the integrated button, manual switching is possible at any time.

Ref. S3136

7.99 € 7.99 EUR 7.99 € Tax Included

8.22 € Tax Included

Not Available For Sale

This combination does not exist.

Contact Us

Share

Download product data sheet
Product Review's
1
Comprador verificado
Perfecto

Certs CE | ROHS
Energy efficiency class A+ (2021)
Connectivity PIR
Dimensions (mm) LxWxH 80x80x49
Frequency (Hz) 50
Frequency of Use Intensive
Guarantee According to legal warranty: 3 years
IP IP20
Material Plastic
Assembly Surface
Orientable No
Maximum power (W) 200
Detection range (m) 8
Temperature range -20°F ~ +40°F
Outdoor Use No
Product Image

Infrared motion sensor switch

The motion sensor is the perfect element for the proper energy management of lighting installations. It works in installations with 3 wires. Ideal infrared sensor to replace wall switches and automate LED lights in areas where movement is limited but it is necessary to keep the light on, such as in offices, school classrooms, restrooms, hallways, stairs, etc.

Mini sensor for indoor use only with a protection rating of IP20. Automatically identifies day and night. It is easy to install and widely used. Integrated button allows for manual switching at any time. Infrared sensor with a detection angle of 160º up to 8 meters, for devices or load accumulation up to 500W. For LED lights 200W.

Main functions of the motion sensor

The motion sensors activate the switch when movement is detected within the selected detection zone and the ambient light levels fall below the selected threshold with the LUX function. After a set time, the switch disconnects and the lights turn off.

➢ It can identify day and night: The consumer can adjust the ambient work light. It can operate in the "sun" position (maximum) during the day and at night. It can work in ambient light of less than 10LUX when set to the "-" position (minimum). Regarding the adjustment pattern, please refer to the test pattern.

➢ Time adjustment: It can be set according to the consumer's preference. The minimum time is 10sec±3sec. The maximum is 7min±2min.

➢ The switch: from left to right is "OFF", "PIR", "ON",

Surface Presence Sensor Installation

The assembly is very simple:

    ➢ Disconnect the power.
      ➢ Loosen the connection at the bottom of the sensor, plug the cable into the connection hole, tighten the screws; remove the sensor surface, connect the sensor in the junction box.
        ➢ If you want to install it in a junction box, insert the mounting screw into the installation hole.
          ➢ Connect the power supply and test it. 

          Technical features of the presence sensor

          • Power Supply: 220-240V-AC
          • Frequency: 50Hz
          • Ambient light: from 3-2000 LUX (adjustable)
          • Response time: minimum 10 seconds +/- 3 seconds.
          • Maximum load: 500W. For LED 200W
          • Detection distance: maximum of 8 meters.
          • Detection range: 160º.
          • Operating temperature: from -20ºC to +40ºC with relative humidity below 93%
          • Recommended installation height: from 2.2 meters to 4 meters.
          • Motion detection speed: 0.6 to 1.5 meters/second.

          Wiring Diagram