Microwave presence sensor
The presence and light sensor is ideal for energy savings as it allows for efficient control of its on and off function via the DIP micro switch. It is easy to install and you can adjust the detection distance (from 2 to 10 meters), the ambient brightness (from 5 Lux to 300 Lux and with daylight), and the turn-off time (from 10 seconds to 30 minutes). This way, you can control when the fixture turns on and off depending on the needs of the area. Additionally, the sensor has a detection angle of 360º, and since it operates via microwaves, you can install it in covered areas as it will still detect movement through doors, windows, or thin walls without metallic materials.
The input voltage is 220-240V-AC and the radar sensor operates at 5.8Hz. The maximum power for the sensor is 1200W for incandescent and 300W for LED fixtures. It has an input channel for the power grid and an output channel for the light source.
Motion sensor features:
- Sensor Radar: 5.8Hz CW radar, ISM band detection
- 360º Detection Angle
- Option to adjust the detection distance between 2m, 5m, 8m, and 10m.
- Option to set the shut-off time to 10s, 60s, 5m, 12m, and 30m.
- Detection light adjustment options: 5L, 30L, 100L, 300L, and with daylight
- Maximum Power: 300W in LED and 1200W in incandescent.
- IP Rating: IP20
- Frequency: 50-60HZ
- Voltage: 220 - 240 V-AC
Sensor configuration using the DIP switch:
With the microwave motion sensor, you can adjust the brightness, the timeout, and the detection range using the DIP switch.
- The detection range adjustment can be set to 2M, 5M, 8M, or 10M. The desired range can be adjusted to avoid unwanted activation and to ensure optimal sensitivity when the sensor is activated.
- The time adjustment can be set to 10 sec, 60 sec, 5 min, 12 min, and 30 min. This is adjusted to define the time that the light will stay on after detection. While there is presence, the sensor will continue to work until it no longer detects any motion.
- The brightness adjustment can be 5L, 30L, 100L, 300L, and with daylight.
Application of motion and light sensor:
- For exclusive use in all types of interiors. Building entrances, stairs, hallways, parking lots, and service stations among many other uses.
- The sensor can be covered, as detection is possible through doors, glass panels, or thin walls.
