Skip to Content
  1. All Products
  2. All Products
  3. OSRAM LED T8 Tube 60cm 7.3W opal glass | SubstiTUBE STAR
Prestashop ES

OSRAM LED T8 Tube 60cm 7.3W opal glass | SubstiTUBE STAR

https://new.barcelonaled.com/web/image/product.template/2474/image_1920?unique=79e239b

LED Tube T8 OPAL glass 600mm 7.3W. 230V-AC, angle 330º. High color uniformity. Replaces traditional T8 fluorescent tubes with energy savings of up to 68%. Instant start and flicker-free.

LED T8 glass tube with G13 base. In neutral tone, 4000ºK, or cool tone, 6500ºK. High luminous intensity of 800 lumens. Direct connection to 230V and suitable for electromagnetic ballasts.

Ref. O455443

6.99 € 6.99 EUR 6.99 € Tax Included

3.05 € Tax Included

Not Available For Sale

This combination does not exist.

Contact Us

Share

Download product data sheet
Product Review's
0

Opening angle (º) 330
Detection angle (º) No
Cap G13
Certs CE | ROHS
Energy efficiency class A+
CRI 80-85
Dimensions (mm) LxWxH Ø26x600
Dimmable No
Driver Internal
Efficiency (Lm/w) 109
Frequency (Hz) 50 - 60
Frequency of Use Intensive
Guarantee 3 years
IP IP20
Kelvin (K) 4000 | 6500
Lumens (Lm) 800
Material Crystal
Material diffuser Crystal
Orientable No
Detection range (m) No
Temperature range No
Sensor No
Nominal Voltage (V) 230
Type of tube T8
Key Cold white | Neutral white
UGR No
Outdoor Use Yes, with waterproof lamps
Service life (h) 30000
Product Image

LED Tube T8 7.3W 60cm Opal Glass

Replaces conventional 60 cm fluorescent lights of 18W

The LED T8 Tube features instant-on technology with no warm-up time. It offers high brightness, with a glass and high light transmission plastic coating (over 90%) that allows for even light distribution.

Perfect for installation in warehouses, garages, stairs, hallways, etc. Suitable for single and duo operation with conventional power supply. High luminous efficacy of 109lm/W and a color rendering index, true to colors, CRI>80.

Extended lifespan of up to 30,000 hours and 200,000 switching cycles. Low heat emission. Dimensions of 603x267x267mm and a weight of only 100 grams.

  • Wide range of AC input from 175V to 265V
  • Circuit short-circuit and overheating protection.
  • Wide opening angle of 330 degrees.
  • Opal cover that does not produce glare.
  • Diameter Ø26mm.
  • Base: G13.
  • Luminous flux: 800 lumens.
  • IP20 protection rating.

Color temperatures of the 60cm T8 tube

  • Neutral light, 4000ºK, ideal for highlighting and illuminating the entire area without altering the view.
  • Cool white light, 6500ºK, perfect for enhancing concentration and optimizing visual performance in kitchens, bathrooms, and offices.

LED T8 Tube Applications

  • Perfect for illuminating enclosed parking lots, offices, stores, shopping galleries, kitchens, etc.
  • Direct replacement for conventional 60cm fluorescent lights, general lighting.
  • Thanks to its angle, it is ideal for wall placement.

               

Installation of Ferromagnetic Reactors

Step 1: Turn off the main electrical panel and check that no electrical current is present.

Step 2: Remove the old tube and then the starter.

Step 3: Install the new LED driver bridge.

Step 4: Remove the capacitor (to prevent voltage surges).

Step 5: Install the new LED tube.

Installation in Electronic Ballasts

Step 1: Turn off the main electrical panel light and ensure there is no electrical current.

Step 2: Remove the old tube (in this case, there is no starter, as it is integrated within the electronic ballast).

Step 3: Disconnect the wires that enter the electronic ballast (there's no need to remove it, just disconnect it electrically).

Step 4: Choose one of the 2 tube holders to connect your 2 wires directly to the electrical network.

Step 5: We recommend marking the lamp holder where the connection has been made to facilitate the installation of the LED tube.