Skip to Content
  1. All Products
  2. All Products
  3. LED Emergency and Permanent Surface Light 150lm 2.5W - 3 hours IP20
Prestashop ES

LED Emergency and Permanent Surface Light 150lm 2.5W - 3 hours IP20

1 review(s)
https://new.barcelonaled.com/web/image/product.template/3255/image_1920?unique=f8db1e3

The 2.5W LED Emergency Light for surface mounting has an IP20 protection rating, making it intended for use indoors.

It can be installed on both ceilings and walls, and its uses are varied, making it suitable for both home and any commercial establishment, offices, hotels, etc.

It includes a 3.6V Ni-MH battery with 0.6Ah and has an autonomy of 3 hours. 

Its LED technology allows for significant energy savings and excellent performance.

Ref. B1056

14.45 € 14.45 EUR 14.45 € Tax Included

14.04 € Tax Included

Not Available For Sale

This combination does not exist.

Contact Us

Share

Download product data sheet
Product Review's
1
Comprador verificado
BIEN

Certs CE | ROHS
Energy efficiency class A+ (2021)
Frequency of Use Intensive
Guarantee According to legal warranty: 3 years
IP IP20
Kelvin (K) 6000
Lumens (Lm) 150
Material Plastic
Assembly Surface
Power (W) 2.5
Temperature range -20°F ~ +40°F
Nominal Voltage (V) 230
Key Cold white
Outdoor Use No
Service life (h) 25,000
Product Image

Surface emergency light with 150 lumens and 3h autonomy

The surface-mounted LED emergency light includes a red pilot light with the indicator "CHARGE." When the red light is on, it indicates that the lamp is charging and the power supply is flowing properly. When a power outage occurs, the red light turns off, and the lamp will turn on.

According to current regulations, it incorporates a "TEST" button on its front. The lamp activates instantly after power supply interruption, without flickering and without overheating.

Technical specifications:

✔ Built-in battery: Ni-mH, 3.6V, 0.6Ah
✔ Voltage: 230V/AC
✔ Approx. battery life: 3 hours on full charge.
✔ Luminous flux: 150 lumens
✔ IP20

Instructions for use:

✔ Before installation, disconnect the power supply.
✔ Do not install this product in an outdoor, wet environment or in locations with corrosive gases.
✔ Use a single circuit; do not connect it with other lights to ensure normal emergency charging.
✔ Regularly check that operating conditions are correct.
✔ When storing long-term or when out of service, check the light's condition every three months to maintain battery performance.

Installation:

The installation method for the emergency light is as follows:

✔  Open the product (turn the bottom part)
✔  Use the mounting screw to secure the bottom casing to the wall.
✔  Pass the AC cable through the hole in the bottom casing and connect the main circuit board to the L and N terminals.
✔  Close the diffuser.
✔  Connect to the AC power supply.