LED emergency light with AutoTest 3W. Reliable illumination during power outages
This LED emergency light provides backup illumination during power outages, offering visibility in emergency situations.
It is made of ABS (acrylonitrile butadiene styrene), a material resistant to impacts.
Incorporates SMD5730 LED chips that ensure clear and intense lighting, even through the adhesive sign, with a luminous flux of 250 lm and a cool white hue (6500K).
The light is not permanent, but it automatically turns on in case of a power failure and has a 3-hour battery life
With an LED indicator, it is possible to know whether the device is operating (green color) or if the battery is charging (red color), making it easy to monitor its status.
Autotest System
Indicates at all times the status of the emergency luminaires. Periodically, the equipment performs two tests according to the UNE-EN 50172 standard:
Functional test: At least once a month, it is necessary to simulate a power supply failure for a sufficient amount of time to ensure that all the fixtures turn on via the battery.
Autonomy test: At least once a year, it must be verified that the autonomy of each device is equal to or greater than the nominal value. To do this, a power supply failure will be simulated, and the batteries will be allowed to discharge completely.
Installation
This emergency light can be installed in two ways:
Recessed: Replacing an old fixture or making a new hole. Once the cut and wiring connection are made, the fixture is simply inserted and secured using its two side tabs.
Surface: It only requires installing with the wiring connection on the wall or ceiling, in a simple and quick manner. The frame that holds the fixture for recessed installation must be removed prior to surface installation.
Includes all the necessary components for assembly.
Precautions during installation:
1) Disconnect the power during installation
2) This product should not be installed in outdoor, humid places, with corrosive gases, etc.
3) This product should be used on a dedicated power circuit. It should not share a circuit with lighting or other electrical equipment (with a switch) to ensure that the battery can recharge normally.
4) To ensure that the product operates normally, it should be checked periodically.
5) The product should be charged for approximately 20 hours before first use.
6) If the product is stored or not used for an extended period, it should be charged and discharged once every three months to protect battery performance.
Applications
- Stores, businesses, and offices.
- Schools and universities.
- Health facilities.
- Entertainment centers.
- Industrial installations.
- Public places.
- Sports facilities.
